ITI MCQ
Home
ELASTICITY - Practice Mode
Categories
WorkShop Calculation and Science
ELASTICITY
Practice Mode
1) What is the ratio of shear stress to shear strain?
Modulus of elasticity
Modulus of rigidity
Bulk modulus
Yield point
Show Answer
Report Question
What's wrong with this question?
Report
Correct Answer: Modulus of rigidity
Question Details
1) What is the ratio of shear stress to shear strain?
Modulus of elasticity
Modulus of rigidity
Bulk modulus
Yield point
2) What is the ratio between stress and strain?
Yield point
Factor of safety
Youngs Modulus
Poisson's ratio
Show Answer
Report Question
What's wrong with this question?
Report
Correct Answer: Youngs Modulus
Question Details
2) What is the ratio between stress and strain?
Yield point
Factor of safety
Youngs Modulus
Poisson's ratio
3) Which force acts on crank shaft?
Shear stress
Torsional stress
Tensile stress
Compressive stress
Show Answer
Report Question
What's wrong with this question?
Report
Correct Answer: Torsional stress
Question Details
3) Which force acts on crank shaft?
Shear stress
Torsional stress
Tensile stress
Compressive stress
4) Which is thermosetting plastic?
Vinyl polymers
Polystyrenes
Celluloid
Melamine resins
Show Answer
Report Question
What's wrong with this question?
Report
Correct Answer: Melamine resins
Question Details
4) Which is thermosetting plastic?
Vinyl polymers
Polystyrenes
Celluloid
Melamine resins
5) What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm
2
? (Pi = 22/7)
1757 N
1575 N
1571.4 N
1577 N
Show Answer
Report Question
What's wrong with this question?
Report
Correct Answer: 1571.4 N
Question Details
5) What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm<sup>2</sup>? (Pi = 22/7)
1757 N
1575 N
1571.4 N
1577 N
Previous Question Set
Back to Question Sets
Next Question Set
Try Another Topic
Try Another Quiz