PROGRAMME AND SIMULATION - Practice Mode
1) What is 'z' in the part program of thread cutting block G76X-Z-P-Q-F-;?
Correct Answer: Thread length
Explanation:
Density or mass density is defined as the mass per unit volume of a liquid at a standard temperature and pressure. Density or mass density is usually denoted by ρ(rho).
Density or mass density is expressed in kg/m3.
Mathematically, density or mass density, ρ=m/V, where
m = Mass of the liquid, and
V = Volume of the liquid.
2) What is the purpose of this code Q in the part program of thread cutting block G76X-Z-P-Q-F-;?
Correct Answer: Minimum depth of
cut
3) What is 'F' code in the part program block of thread cutting G76X-Z-P-Q-F-;?
Correct Answer: Feed pitch of the thread
Explanation:
The density of aluminum is typically around 2.7 g/cm³ (grams per cubic centimeter) or 2,700 kg/m³ (kilograms per cubic meter). This value can vary depending on the specific alloy of aluminum, and its temperature, shape and other factors.
The density of pure aluminum is about 2.7 g/cm³, but when mixed with other metals like copper, magnesium, silicon, and zinc, it can have a different density.