CNC TURNING OPERATIONS - Practice Mode

1) What is the code value of Q2000 if the grooving program block is like this G75X28.0 Z-45.0 P500 Q2000 F0.08; in this program block?

The total groove depth is 2000 microns The incremental depth of cut in 'x' axis The groove final diameter The incremental depth of cut in 'z' axis

Correct Answer: The incremental depth of cut in 'z' axis

2) Which status the data cannot be output for inputting / outputting data?

In jog mode In edit mode In simulation mode The data output can not be done in an alarm status

Correct Answer: The data output can not be done in an alarm status

3) How to compensate the pitch error in the part program, if pitch error is enabled?

The pitch error compansation amount of value to be input All the threaded area value to be changed and input Thread height value to be changed Minor diameter value to be compensated

Correct Answer: The pitch error compansation amount of value to be input

4) What is the full form of CAM?

Computer Aided Manufacturing Computer Application in Maintenance Computer Attached Monitering system Computer Applicable Monitering Process

Correct Answer: Computer Aided Manufacturing

5) What is the purpose of CAM software in CNC area?

Direct manufacturing without part program Traning and academics on CNC axes While using CAM, there no need of component design Execution of program

Correct Answer: Traning and academics on CNC axes

Previous Question Set Back to Question Sets Next Question Set

Try Another Topic

Try Another Quiz