WOOD WORKING MACHINE SAWING - Practice Mode

1) Which determines the size of wood turning lathe

Width of the work piece Length of the work piece Thickness of the work piece Diameter of the swing in work piece

Correct Answer: Diameter of the swing in work piece

2) Which material is used in manufacture of horizontal bed in wood turning lathe?

Big iron Cast iron Drop forged steel High utensil steel

Correct Answer: Cast iron

3) Which part is used for turning stand base, fruit bowls in wood turning lathe

Cup chuck Face plate Cup centre Dead centre

Correct Answer: Face plate

Explanation:

Faceplates are used to hold work that is too large or of such a shape that it cannot be held in a chuck or between centers. Faceplates are equipped with several slots to permit the use of bolts to secure the work, so that the axis of the workpiece may be aligned with the lathe centers. When work is mounted off – center, a counterbalance should be fastened to the faceplate to prevent imbalance and the resultant vibrations when the lathe is in operation.

4) What is the use of dead centre in wood turning lathe?

Hold the work Hold the chisel Drives the work Support the tool

Correct Answer: Hold the work

5) Which type of chisel is used for turning the work from square to round

Skew chisel Gouge chisel Parting chisel Spear point chisel

Correct Answer: Gouge chisel

Previous Question Set Back to Question Sets Next Question Set

Try Another Topic

Try Another Quiz